2017年4月30日星期日

Robot'S Main features

Robot'S Main features:
   First,  precision turned parts mechanical hand (the upper and lower material robot, assembly robot, handling robot, stacking robot, help robot, vacuum handling machines, vacuum suction crane, labor-saving spreader, pneumatic balancer, etc.). Second cantilever cranes (cantilever crane, electric chain hoist crane, air balance the hanging, etc.)
  Third, rail-type transport system (hanging rail, light rail, single girder cranes, double-beam crane) machinery,
 Four, industrial machinery, precision turned parts application of hand Manipulator in the mechanization and automation of the production process developed a new type of device.

 In recent years, precision turned parts as electronic technology, especially computer extensive use of robot development and production of high-tech fields has become a rapidly developed a new technology, which further promoted the development of robot, allowing robot to better achieved with the combination of mechanization and automation
  
Precision CNC machining parts

2017年4月23日星期日

Mechanical hand classification and characteristics

  Mechanical hand classification and characteristics
 Robots are generally divided into three categories:
 Precision CNC machining parts The  first is the general machinery does not require manual hand. It is an independent not affiliated with a particular host device.
 It can be programmed according to the needs of the task to complete the operation of the provisions. It is characterized with ordinary mechanical performance, also has general machinery, memory, intelligence ternary machinery.
  Precision CNC machining partsThe second category is the need to manually do it, called the operation of aircraft. It originated in the atom, military industry, first through the operation of machines to complete a particular job, and later developed to operate using radio signals to carry out detecting machines such as the Moon. Used in industrial manipulator also fall into this category.

   Precision CNC machining partsThe third category is dedicated manipulator, the main subsidiary of the automatic machines or automatic lines, to solve the machine up and down the work piece material and delivery. This mechanical hand in foreign countries known as the "Mechanical Hand", which is the host of services, from the host-driven; exception of a few outside the working procedures are generally fixed, and therefore special
  
  Precision CNC machining parts

2017年4月16日星期日

The composition

The composition
  Precision CNC machining parts  the composition, mechanical hand Robot in the form of a variety of forms, some relatively simple, some more complicated, but the basic form is the same as the composition of the , Usually by the implementing agencies, transmission systems, control systems and auxiliary devices composed.
 1. Implementing agencies Manipulator executing agency by the hands, wrists, arms, pillars. Hands are crawling institutions, Precision CNC machining parts is used to clamp and release the workpiece, and similar to human fingers, to complete the staffing of similar actions. Wrist and fingers and the arm connecting the components can be up and down, left, and rotary movement. A simple mechanical hand can not wrist. Pillars used to support the arm can also be made mobile as needed.
2. Transmission The actuator to be achieved by the transmission system. Sub-transmission system commonly used manipulator mechanical transmission, hydraulic transmission, pneumatic and electric power transmission and other drive several forms

 3. Precision CNC machining parts Control System Manipulator control system's main role is to control the robot according to certain procedures, direction, position, speed of action, a simple mechanical hand is generally not set up a dedicated control system, using only trip switches, relays, control valves and circuits can be achieved dynamic drive system control, so that implementing agencies according to the requirements of action. Action will have to use complex programmable robot controller, the micro-computer control.
  
 Precision CNC machining parts

2017年4月9日星期日

There are also places where it fly in the ointment:

There are also places where it fly in the ointment:  
 1. As the compressibility of air, resulting in poor aerodynamic stability of the work, resulting in the implementing agencies as the precision of the velocity and not easily controlled.
 2. As the use of low atmospheric pressure, the output power can not be too large; in order to increase the output power is bound to the structure of the entire pneumatic system size increased.
Precision CNC machining parts With pneumatic drive and compare with other energy sources drive has the following advantages: Air inexhaustible, used later discharged into the atmosphere, without recycling and disposal, do not pollute the environment. Accidental or a small amount of leakage would not be a serious impact on production.
Precision CNC machining parts Viscosity of air is small, the pipeline pressure loss also is very small, easy long-distance transport. The lower working pressure of compressed air, pneumatic components and therefore the material and manufacturing accuracy requirements can be lowered. In general, reciprocating thrust in 1 to 2 tons pneumatic economy is better.Compared with the hydraulic transmission, and its faster action and reaction, which is one of the outstanding merits of pneumatic.

Precision CNC machining parts Clean air medium, it will not degenerate, not easy to plug the pipeline. It can be safely used in flammable, explosive and the dust big occasions. Also easy to realize automatic overload protection.

 Precision CNC machining parts

    

2017年4月2日星期日

Comparison have the following advantages

  Comparison have the following advantages
 Precision CNC machining parts With pressure-driven and other energy-driven comparison have the following advantages:
1. Air inexhaustible, used later discharged into the atmosphere, does not require recycling and disposal, do not pollute the environment. (Concept of environmental protection)
2.  Precision CNC machining parts Air stick is small, the pipeline pressure loss is small (typically less than asphalt gas path pressure drop of one-thousandth), to facilitate long-distance transport.
3. Compressed air of the working pressure is low (usually 4 to 8 kg / per square centimeter), and therefore moving the material components and manufacturing accuracy requirements can be lowered.
4. Precision CNC machining parts With the hydraulic transmission, compared to its faster action and reaction, which is one of the advantages pneumatic outstanding.

 5. The air cleaner media, it will not degenerate, not easy to plug the pipeline.
    
  Precision CNC machining parts