cutting speed

cutting speed, precision metal parts feed rate is an important parameter in the CNC machine tool cutting parameters, mainly based on the machining accuracy and surface roughness and the tool, workpiece material properties, select the maximum feed rate, machine tool stiffness and feeding system performance limitations., near the corner of contouring feed rate should be appropriately reduced in order to overcome the inertia or process systems is caused by deformation in the contour around the corner "overtravel" or "under process" phenomenon. to determine the principles of the feed rate : When the workpiece quality requirements can be guaranteed, in order to improve production efficiency, can choose a higher feed rate generally selected in the range of 100 ~ 200mm/min. processing in high-speed steel cutting tools, cutting, machining deep hole or should choose a lower feed rate, generally 20 ~ 50mm/min select range of .3 when machining accuracy, surface roughness, the feed rate should be selected smaller, generally in the 20 ~ 50mm/min range within selected .4 tool air travel, especially long-distance back to zero, you can select the CNC system given the maximum feed rate.

  precision metal parts back to eat the knife amount (or side knife to eat the amount determined under the premise of ensuring the quality of the machined surface, the back of cut (ap) should be determined according to the stiffness of the machine tool, workpiece and tool under the conditions allowed by stiffness, should as much as possible so that the back of cut allowance equal to the workpiece, thus reducing the number of tool path, and increase productivity.

   precision metal partss machining centers with axial and neck power head, to achieve the linkage of the three coordinates. Polar coordinate interpolation instruction and cylindrical interpolation instruction program optimization and development, and the machining station repeated positioning error of the effective compensation, the initial fast and reliable precision milling on the side of the rotary to improve the machining accuracy and surface finish quality.