Primary Cutting Parameters
China precision machining Cutting the work piece and
tool based on the basic relationship between the following four elements to
fully describe : the tool geometry, cutting speed, feed rate, depth and
penetration of a cutting tool.
Cutting Tools must be of a suitable material to manufacture, it must be
strong, tough, hard and wear-resistant. Tool geometry -- to the tip plane and
cutter angle characteristics for each cutting process must be correct.
China precision machining Cutting speed is the cutting
edge of work piece surface rate, it is inches per minute to show. In order to
effectively processing, and cutting speed must adapt to the level of specific
parts -- with knives. Generally, the more hard work piece material, the lower
the rate.
Progressive Tool to speed is cut into the work piece speed. If the work
piece or tool for rotating movement, feed rate per round over the number of
inches to the measurement. When the work piece or tool for reciprocating
movement and feed rate on each trip through the measurement of inches.
Generally, in other conditions, feed rate and cutting speed is inversely
proportional to.
China precision machining Depth of penetration of a
cutting tool -- to inches dollars -- is the tool to the work piece distance.
Rotary cutting it to the chip or equal to the width of the linear cutting chip
thickness. Rough than finishing, deeper penetration of a cutting tool depth.
没有评论:
发表评论