Daidao system for the automatic tool change

Daidao system for the automatic tool change 

cnc milling machine  Figure 2.4 shows the knife and the whole machine tool CNC machine tools for the appearance of Fig.  

   

 Figure 2.5 shows the knife and split-type machine to the appearance of CNC machine tool plans.     

  

 At this point, knife storage capacity, cnc milling machine  a heavier tool can, and often additional transport unit to complete the knife between the spindle and cutting tool transport.   Daidao the knife from the ATC, the election knives, automatic loading and unloading machine tool and tool exchange institutions (manipulator), composed of four parts, used widely. 

    Tool Automatic Tool Change the manipulator system, the whole process more complicated ATC. We must first used in the processing of all installed in the standard tool on the knife handle in the machine outside the pre-size, according to a certain way Add to the knife. ATC, selected first in the knife knife, and then from ATC, from the knife from the knife or spindle, exchange, the new knife into the spindle, the old knife back into the knife.    

 ATC, as the former two knives to accommodate a limited number can not be too many, can not

  meet the needs of complex parts machining, CNC machine tool Automatic Tool Change Daidao the use of the automatic tool change devices. The knife has more capacity, both installed in the spindle box side or above. As for the automatic tool change Daidao device CNC machine tool spindle box only a spindle, spindle components to high stiffness to meet the machining requirements. The number of establishments in larger knife, which can meet the more complex parts of the machining processes, significantly improving productivity. Daidao system for the automatic tool change applied tocnc milling machine   drilling centres and CNC machining centers. The comparison drawn Daidao automatic tool change system is the most promising.