Electrical Control System
This tool storage systems is the Cnc machining main electrical control their shelves
for operational control and position control. Operational control equipment,
including operation of the start of braking control. Position Control is the main
location and address of the shelves for testing. Control
system as shown in
Figure 1
1)
Electric Transmission horizontal rotary tool storage systems are the mechanical
movements are repeated short-term work system. And the run-time system needs
some speed, speed transmission needs,Cnc machining the system will use VVVF method can be
used simple structure, reliable operation of the motor and frequency
inverter.
2)
Control of the system is divided into two kinds of manual control and automatic
control, manual control as a general reserve and debugging methods of work;
ways to the system control computer (IPC) and the control unit (inverter
contactor , etc.) consisting of a control system.
3)
location and positioning accuracy of the system automatically identify the site
and location using a detection device as proximity switches, relays through the
plate-point isolation and the number plate recorded close to the switching
signal acquisition and operation of Hutchison with a Optimal Path addressable
identify the current location and shelves of the purpose of the shelf location.
In order to enable a more accurate positioning system,Cnc machining adopted two
photoelectric switches, to detect the two shelves of the two films.
没有评论:
发表评论