#Machining #Manufacturing #Engineering#Heat sink

#Machining #Manufacturing #Engineering#Heat sink

As a result of milling and cutting force cutting more and more intermittent cutting edge, easy processing of vibration, so they should pay attention to the design of milling machine fixture: clamping force to be sufficient self-locking and anti-stroke; fixture installation to be accurate and reliable , that is, when the processing installation and the proper use of directional keys on the knife device; precision turned parts specific folder have sufficient stiffness and stability, the structure must be reasonable. 

 precision turned parts As a result of milling and cutting force cutting more and more intermittent cutting edge, easy processing of vibration, so they should pay attention to the design of milling machine fixture: clamping force to be sufficient self-locking and anti-stroke;fixture installation to be accurate and reliable , that is, when the processing installation and the proper use of directional keys on the knife device; specific folder have sufficient stiffness and stability, the structure must be reasonable. 

1. Directional keys

 Directional key position, also known as keys, installed on the bottom of the vertical slot fixture, generally with two, an in a straight line, the farther the distance, the higher the precision-oriented, with screw fastening in the specific folder.   Directional keys work with the milling machine with table-shaped slot in the machine tool fixture to determine the correct position; can absorb part of the cutting torque, reducing the load on clamping bolt to increase the stability of the fixture, so flat and some special drilling jig boring machine fixture is also frequently used.  Directional keys are rectangular and round two.

 2. Of the knife device

   precision turned parts precision turned partsDevices on the knife block and knife by the side of the foot of the fixture and tool used to determine the relative position. The structure of the form of a knife depends on the shape of the surface processing.

  Directional high-precision fixture should not be used or heavy directional keys, but in the specific folder on one elongated side processing as a base to look for is the installation location calibration fixture.Knife block on the pin and screw fastener commonly used in the specific folder, its location should be easy-to-use plug-foot on the knife, without prejudice to the workpiece loading and unloading. On the knife when the knife cutter block with a plug in between the feet with the knife tool to avoid direct contact block or cause damage to the knife blade block premature wear. Cypriot Cypriot feet are flat feet and two-foot cylindrical plug, the thickness and diameter of 3 ~ 5mm, manufacturing tolerance h6.

  Side of the knife block and feet have been standardized (the design can be found in the relevant manual), use the total fixture Sedat map scale should be marked on the knife block size and the work surface and positioning the location between the components. Devices should be installed on the blade of the knife and is easy to cut one end of the workpiece.

  

#Machining #Manufacturing #Engineering#Heat sink

Helical Clamp   

 Precision CNC machining parts  Used as intermediate screw transmission components are collectively referred to as the clamping screw clamping body organs. Because of its simple structure reliable clamping common good and as a result of the small helix angle spiral of self-locking clamping body good clamping force and the clamping itinerary are larger fixture on manual with the most a clamping body.   

  1. Simple screw clamp body

  The simplest spiral as a result of the direct use of clamping bodies pressed workpiece screw head so easy to Precision CNC machining parts  damage the surface of the work piece under pressure or driven rotating work piece. So often in the head with swinging Press. Press with the work piece as a result of friction between the Press and the torque is greater than the friction between the screw torque screw together with the Press will not rotate. 

   Clamping action slow time-consuming loading and unloading the work piece is a single spiral Another drawback of the Clamp. To overcome this shortcoming the rapid clamping bodies can be.

 2.Clamp screw plate    

  Precision CNC machining parts Institutions in the clamping the use of spiral plate is very common common structure of the spiral structure of a typical plate size has been standardized the designer can refer to the relevant national standards and fixture design manual design. 

  

#Machining #Manufacturing #Engineering#Heat sink

#Machining #Manufacturing #Engineering#Heat sink

 To improve the milling fixture installed in the machine tool stability, Precision CNC machining parts  reduce its intermittent cutting may be caused by vibration, not only in the specific folder have sufficient stiffness and strength, their height and width ratio should also beappropriate, a general H / B ≤ 1 ~ 1.25, in order to reduce the fixture center of gravity, so that as close as possible to the workpiece surface countertops.

Precision CNC machining parts In addition, we must set a reasonable and ear blocks to strengthen the tendons.   If the folder specific wide, can be set up in the same side of two T-slot milling machine table equidistant between the ears Block; of heavy-duty milling fixtures, specific folders should also be set up at both ends of the rings, such as lifting holes or to carry.   In the milling process, the often installed in the milling fixture table, together with the jig with the workpiece feed table for movement.In the milling process, the often installed in the milling fixture table, together with the jig with the workpiece feed table for movement. According to the workpiece feed means of general milling fixture can be divided into the following two types:    

  1. Linear feed-type milling fixture 。In the milling process, the often installed in the milling fixture table, together with the jig with the workpiece feed table for movement.

2. Circle feed milling fixture.Such fixtures are commonly used in the milling machine with rotary table, the workpiece table, together with the fixture with the continuous, slow movement of the rotary feed, no parking will be loading and unloading the workpiece. According to the processing requirements of the two cutter head can also be rough at the same time, finishing  

  Precision CNC machining parts Milling is a flat, keyway, gear and a variety of forming surface processing methods commonly used. Processing the workpiece in the milling machine, the general adoption of the following types of clamping methods:   

   (1) directly in the milling machine table clamping a large workpiece clamping often directly in the table, with stud, plate compactor, which need to dial indicator methods, tools such as zoned to find the needle surface and the cutter is processing relative position.      

 (2) vice flat tool used for clamping the workpiece in the shape of a simple, small parts, general machine tools can be used in clamping vice in the mouth, the need to ensure that when used in machine vice the correct position.

  (3) dividing head with the workpiece clamping, the need for indexing of the workpiece, the general direct clamping head in the sub-degrees. In addition, indexing of the workpiece without dividing head with clamping processing is also very convenient.

 (4) with V-shaped frame workpiece clamping method is generally applicable to.

Manipulator

Manipulator

  Robot developed in  Precision CNC machining parts recent decades as high-tech automated production equipment. Industrial robot is an important branch of industrial robots.

 It features can be programmed to perform tasks in a variety of expectations, in both structure and performance advantages of their Precision CNC machining parts own people and machines, in particular, reflects the people's intelligence and adaptability. The accuracy of robot operations and a variety of environments the ability to complete the work in the field of national economy and there are broad prospects for development.

 Precision CNC machining parts With the development of industrial automation, there has been CNC machining center, it is in reducing labor intensity, while greatly improved labor productivity. However, the upper and lower common in CNC machining processes material, usually still use manual or traditional  relay-controlled semi-automatic device. The former time-consuming and labor intensive, inefficient; the latter due to design complexity, require more relays, wiring complexity, vulnerability to body vibration interference, while the existence of poor reliability, fault more maintenance problems and other issues. Programmable Logic Controller PLC-controlled robot control system for materials up and down movement is simple, circuit design is reasonable, with a strong anti-jamming capability, ensuring the system's reliability, reduced maintenance rate, and improve work efficiency.

 Robot technology related to mechanics, mechanics, electrical hydraulic technology, automatic control technology, sensor technology and computer technology and other fields of science, is a cross-disciplinary integrated technology.

Numerical control system choice

Numerical control system choice 

  When the numerical control system mainly has three kind of types, the transformation, should act according to the special details to carry on the choice

Step-by-steps the open system which the electrical machinery drives   

   This system servo drive mainly is step-by-steps the electrical machinery, the power step-by-steps the electrical machinery, Cncmachining the battery solution pulse motor and so on. Entering sends out which by the numerical control system for instruction pulse, after the actuation electric circuit control and the power enlargement, causes to step-by-step the electrical machinery rotation, through gear vice- and ball bearing guide screw vice- actuation executive component. So long as the control command pulse quantity, the frequency as well as the circular telegram order, then may control the executive component movement the displacement quantity, the speed and the heading. This kind of system does not need the physical location and the velocity feedback which obtains to the input end, therefore called it the open system, this system displacement precision mainly decided in step-by-steps the electrical machinery angular displacement precision, transmission part and so on gear guide screw pitches the precision, therefore the system displacement precision is low.  

  This system structure simple, debugging service convenient, work reliable, cost low, is easy to reequip successfully

 The asynchronous motor or the direct current machine drive, diffraction grating survey feedback closed loop numerical control system 

  This system and the open system difference is: Cncmachining  Physical location feedback signal which by position detector set and so on the diffraction grating, induction synchromesh obtains, carries on the comparison as necessary with the given value, two interpolations enlargements and the transformation, the actuation implementing agency, by the speed which assigns turns towards the elimination deviation the direction movement, until assigns the position and the feedback physical location interpolation is equal to the zero. The closed loop enters for the system  Enters for the system complex in the structure compared to the split-ring, the cost is also high, requests strictly to the environment room temperature. The design and the debugging is all more difficult than the open system. But may obtain compared to the split-ring enters for a system higher precision, quicker speed, actuation power bigger characteristic target. May act according to the product specification, decided whether uses this kind of system

 The direct current servo electrical machinery drives, encoder feedback semi-closure link numerical control system

 Half closed-loop system examination part installs in among passes in the moving parts, indirectly surveys the executive component the position. It only can compensate a system ring circuit interior part of part the error, therefore, its precision compared to closed-loop system precision low, but its structure and the debugging all compares the closed-loop system to be simple. In makes the angular displacement examination part and the speed examination part and the servo electrical machinery time a whole then does not need to consider the position detector set installs the question

  The current production numerical control system Cncmachining  company factory quite are many, overseas famous company like German SIEMENS Corporation,

 Japanese FANUC Corporation; Native corporation like China Mount Everest Corporation, Beijing astronautics engine bed numerical control system group company, Central China numerical control company and Shenyang upscale numerical control country engineering research center. 

  When choice numerical control system mainly is each kind of precision which the engine bed must achieve after the numerical control transformation, actuates the electrical machinery the power and user's request.

Grinding technology development trend

Grinding technology development trend

 Precision CNC machining parts Grinding machining is important processing technology in mechanical manufacturing. With precision mechanical products, the requirement of increasing the reliability and service life, high hardness, high strength, high wear resistance, high functional new materials application increased, for grinding processing and put forward many new problems, such as material of grinding machining and surface integrity, super precision grinding and high efficiency grinding and grinding automation, etc. Problems to be solved.At present, the grinding technology is moving toward using super hard abrasives, development of precision and ultra precision grinding, high speed, high efficiency grinding technology and the development of high precision, high stiffness of the grinding machine automation direction. 

 One.   In-depth development of grinding theory and technology research

 Precision CNC machining parts Grinding theory research is the basis for the development of grinding technology, the grinding technology and the development of practice and research provides the opportunity for grinding theory, requirement and new topic, in recent ten years, professionals engaged in the work of grinding, grinding technology and phenomenon many factors for a lot of in-depth research and achieved fruitful results.

 Two.  Unit grinding machine high speed, high precision components manufacturing technology 

 Precision CNC machining parts High precision grinding machine spindle unit, feeding unit, bearing unit and auxiliary unit is the key parts and components. Spindle unit including spindle power, shaft, bearing, and frame sections, she affects the precision of the machining system, stability and application scope, its dynamic performance and stability of high performance precision ultra-precision grinding, play a key role. Feed unit including the position detection unit, Demand of feed units, therefore, flexible operation, high resolution, high positioning accuracy, not crawl and large movement range, both to have larger acceleration, and large enough thrust, high stiffness, quick dynamic response, high positioning accuracy. Machine tools supporting technology mainly refers to the supporting member of design and manufacturing technology. Auxiliary unit technology including fast clamping workpiece, high efficiency grinding fluid filtration system, machine safety devices, chip removal and the workpiece cleaning technology, spindle and grinding wheel dynamic balance technology, etc.

Introduction of Machining

Introduction of Machining

  Precision CNC machining parts Machining as a shape-producing method is the most universally used and the most important of all manufacturing processes. Machining is a shape-producing process in which a power-driven device causes material to be removed in chip form. Most machining is done with equipment that supports both the work piece and cutting tool although in some cases portable equipment is used with unsupported workpiece. 

 Precision CNC machining parts  Low setup cost for small quantities. Machining has tow applications in manufacturing. For casting, forging, and pressworking, each specific shape to be p5roduced, even one part, nearly always has a high tooling cost. The shapes that may be produced, even one part, nearly always has a high tooling cost. The shapes that may be produced by welding depend to a large degree on the shapes of raw material that are available. By making use of generally high cost equipment but without special tooling, it is possible, bu machining, to start with nearly any form of any material, so long as the exterior dimensions are great enough, and produce any desired shape from any material. Therefore, machining is usually the preferred method for producing one or a few parts, even when the design of the part would logically lead to casting, forging or pressworking if a high quantity were to be produced.  Close accuracies, good finishes. The second application for machining is based on the high accuracies and surface finishes possible.

 Precision CNC machining parts  Many of the parts machined in low quantities would be produced with lower but acceptable tolerances if produced in high quantities by some other process. On the other hand, many pars are given shapes by some high quantity deformation process and machined only on selected surfaces where high accuracies are needed. Internal threads, for example, are seldom produced by any means other than machining and small holes in pressworked parts may be machined following the pressworking operations.